products

Dehumidifier

CFJ series dehumidifiers are designed for the needs of various cabinet anti-condensation. Thermoelectric semiconductors with high thermoelectric conversion efficiency are used to make it small in size and high in dehumidification efficiency. It can effectively prevent the reduction of the insulation level of the equipment caused by condensation and adhesion on the insulation surface of equipment, so to avoid reptiles and flashover accidents caused by condensation of the switchgear cabinet.

item no.:
CFJ15

inquiry now

details

Image and size	Model	Installation	Accuracy	Control logic	Power supply
Width x Height x depth 79 x 67 x 110.5 mm	CFJ15A01	DIN35mm lead rail or fixed installation	Temperature ±1℃ Humidity ±5%RH	Humidity>55%RH Start dehumidification Humidity<45%RH Stop dehumidification Temperature >50℃ Or <5℃ dehumidifier will be turned off	24V
	CFJ15B01				AC/DC 110V-220V
	CFJ15C01				48V

hot tags :

next :
RMU Fuse Canister

categories

Hot Products

Short Circuit and Earth Fault Detector

EKL4B Short Circuit and Earth Fault Detector indicates high voltage power line short circuit fault by detecting the 3 single-phase line-currents and short circuit currents, and the grounding fault by detecting the zero sequence currents. With visual or audible indicators, it helps line patrol staff to fast find out the location where there is a short circuit or grounding fault on the 3kV-40.5kV power distribution networks, switchgears or cable branching units etc.
High Voltage Indicator

DXN3-T High Voltage Indicator indicates the voltage status of the main circuit of the high voltage electrical equipments, preventing electrical misoperation and accidental entry into the area with high voltage presence.
Instrument Transformer

LMZK3 split core instrument transformer is suitable for measurement of primary current, or for protection of electrical equipments such as microcomputer in 10KV and 35KV AC power distribution networks. It is widely used in fully insulated ring network switchgears such as ABB-Safe Ring/Safe Plus...and cable distribution boxes. The transformer can be directly installed at the inlet and outlet of the GIS or AIS cables. The semicircular ring core and secondary windings are vacuum poured by insulated resin. This CT is also used for signal acquisition for RTU or FTU.
Motor Drive Operating Mechanism

AD DC 3 – S / AC220 series of Motor Drive Operating Mechanism are applicable for modules of ABB safe cabinets. Operated by motor gear, it can store energy to make-and-break the circuit breakers of MV switchgears. Functions include Remote/local switching and local make-and-break of switches, local and remote indication of the status of load switches, earth switches and fuses.
Switchgear Temperature Controller

KST series of small-sized temperature controller and bimetallic thermostat dedicated for switchgears 10℃. It can automatically start fans or heaters and adjust temperature and humidity of the surrounding according to on-site situation. The contacts will output action indication signals, when ambient temperature is higher than pre- set temperature, the contact of controller will flip so to protect the equipments from being damaged.

Send a message

Contact Us

Xiamen Andaxing Electric Group Co.,Ltd TEL：86-592-3102888 or 3170079 FAX：86-592-3170008 Email : ade@cnade.net ADD：58th, Siming Park, Tong’an Industrial Zone, Xiamen, China. Zip Code : 361100 Websites : www.andaxingelectric.com www.andaxing.net www.cnade.net

related products

Switchgear Thermostat

KST series of small-sized thermostat and bimetallic thermostat dedicated for switchgears 10℃. It can automatically start fans or heaters and adjust temperature and humidity of the surrounding according to on-site situation. The contacts will output action indication signals, when ambient temperature is higher than pre- set temperature, the contact of controller will flip so to protect the equipments from being damaged.

Switchgear Temperature Controller

KST series of small-sized temperature controller and bimetallic thermostat dedicated for switchgears 10℃. It can automatically start fans or heaters and adjust temperature and humidity of the surrounding according to on-site situation. The contacts will output action indication signals, when ambient temperature is higher than pre- set temperature, the contact of controller will flip so to protect the equipments from being damaged.

RMU Fuse Canister

Fuse canister is used in 12KV solid- insulated RMU. The product is an important protection part of switch cabinet.

Motor Operating Device

AD DC 2 – A/ AC220 series of Motor Operating Device are applicable for modules of ABB safe cabinets. Operated by motor gear, it can store energy to make-and-break the circuit breakers of MV switchgears. Functions include Remote/local switching and local make-and-break of switches, local and remote indication of the status of load switches, earth switches and fuses.

LXZK2 Split Core Current Transformer

LXZK series split core current transformer is suitable for measurement of primary current , or for protection of electrical equipments such as microcomputer in 10KV and 35KV AC power distribution networks. It is widely used in fully insulated ring network switchgears such as ABB-Safe Ring/Safe Plus...and cable distribution boxes. The transformer can be directly installed at the inlet and outlet of the GIS or AIS cables. The semicircular ring core and secondary windings are vacuum poured by insulated resin. This CT is also used for signal acquisition for RTU or FTU.

Motor Gearbox for GIS

AD DC 4 – Q / AC220 series of Motor gearbox for GIS are applicable for modules of ABB safe cabinets. Operated by motor gear, it can store energy to make-and-break the circuit breakers of MV switchgears. Functions include Remote/local switching and local make-and-break of switches, local and remote indication of the status of load switches, earth switches and fuses.

Short Circuit and Earth Fault Indicating Device

Short Circuit Earth Fault Indicating Device

EKL4 Short Circuit Earth Fault Indicating Device indicates high voltage power line short circuit fault by detecting the 3 single-phase line-currents and short circuit currents, and the grounding fault by detecting the zero sequence currents. With visual or audible indicators, it helps line patrol staff to fast find out the location where there is a short circuit or grounding fault on the 3kV-40.5kV power distribution networks, switchgears or cable branching units etc.